The ME 66 is a shot gun microphone capsule designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments. Matte black, anodized, scratch-resistant finish.
ME66 Features
Super-cardioid/lobar pick-up pattern
Highly directional
Low inherent self-noise
High sensitivity
Wide frequency response
The K6 powering module is the heart of the Sennheiser professional modular microphone system and can be powered either by its internal 'AA' size 1.5 V battery or by 12 - 48 V phantom power. The K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns. Matte black, anodized scratch-resistant finish.
K6 Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch with battery test position
High output low noise
Transformerless balanced output on 3-pin XLR connector
ME66 Features
Super-cardioid/lobar pick-up pattern
Highly directional
Low inherent self-noise
High sensitivity
Wide frequency response
The K6 powering module is the heart of the Sennheiser professional modular microphone system and can be powered either by its internal 'AA' size 1.5 V battery or by 12 - 48 V phantom power. The K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns. Matte black, anodized scratch-resistant finish.
K6 Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch with battery test position
High output low noise
Transformerless balanced output on 3-pin XLR connector
| Polar Pattern | Super-Cardioid |
|---|---|
| Transducer Type | Condensor |
| Power Requirements | Phantom Power, (12 - 48V) or 1.5V 'AA' Size Battery, (150 Hour Battery Life) |
| Frequency Response | 40 – 20,000 Hz ± 2.5 dB |
| Sensitivity | (free field, no load) (1 kHz) 50 mV/Pa ± 2.5 dB |
| Nominal Impedance | 200 Ω (with K6) |
| Equivalent Noise Level | A-weighted (DIN IEC 651) 10 dB / CCIR-weighted (CCIR 468-3) 21 dB |
| Signal to Noise Ratio | 84 dB |
| Max SPL (1kHz) | 126 dB (THD = 1 %) |
| Connector | ME66 has threading to connect to K6 / K6 has 3-Pin XLR |
| Dimensions | ME66 microphone and K6 power module combo is 12.4" Long x .885 Diameter |
| Weight | ME66 microphone and K6 power module combo is approx 3.95 oz |
