The ME 66 is a shot gun microphone capsule designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments. Matte black, anodized, scratch-resistant finish.
ME66 Features
Super-cardioid/lobar pick-up pattern
Highly directional
Low inherent self-noise
High sensitivity
Wide frequency response
The K6P powering module is at the heart of Sennheiser’s professional
modular condenser microphone system. It is similar to the K6 powering
module but is powered by 12 – 48 V phantom power only, for use where
battery power is not required (e.g. permanent installations). The K6P can
be combined with various microphone heads to produce microphones
with a variety of pick-up patterns. Matt black, anodised, scratch-resistant
finish.
K6P Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery includes: 1 K6P powering module, 1 MZQ 200 microphone clamp, 1 protective carrying case
ME66 Features
Super-cardioid/lobar pick-up pattern
Highly directional
Low inherent self-noise
High sensitivity
Wide frequency response
The K6P powering module is at the heart of Sennheiser’s professional
modular condenser microphone system. It is similar to the K6 powering
module but is powered by 12 – 48 V phantom power only, for use where
battery power is not required (e.g. permanent installations). The K6P can
be combined with various microphone heads to produce microphones
with a variety of pick-up patterns. Matt black, anodised, scratch-resistant
finish.
K6P Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery includes: 1 K6P powering module, 1 MZQ 200 microphone clamp, 1 protective carrying case
| Polar Pattern | Super-Cardioid |
|---|---|
| Transducer Type | Condensor |
| Power Requirements | Phantom Power, (12 - 48V) |
| Frequency Response | 40 – 20,000 Hz ± 2.5 dB |
| Sensitivity | (free field, no load) (1 kHz) 50 mV/Pa ± 2.5 dB |
| Nominal Impedance | 200 Ω (with K6P) |
| Equivalent Noise Level | A-weighted (DIN IEC 651) 10 dB / CCIR-weighted (CCIR 468-3) 21 dB |
| Signal to Noise Ratio | 84 dB |
| Max SPL (1kHz) | 126 dB (THD = 1 %) |
| Connector | ME66 has threading to connect to K6 / K6 has 3-Pin XLR |
| Dimensions | ME66 microphone and K6P power module combo is 10.9" Long x .885 Diameter |
| Weight | ME66 microphone and K6 power module combo is approx 2.95 oz |
