The P110S utilize a double bearing system on the bottom in order to prevent the wobbling generated by quick vertical motion, and to provide smooth movement. Set up is very easy: unfold the dolly legs, set the pedestal column into the dolly, and use the air pump to adjust the air pressure to correspond to the weight of your camera. You can also adjust the air pressure with your camera attached. The air is tightly sealed, maintaining pressure for extended periods of time, and the lock knobs securely stabilize the unit for extensive shooting. Maximum load weight is 30kg / 66lb. It also can be used with the H100 head for faster system shooting. This high performance LIBEC pedestal system is the perfect solution for your indoor/outdoor shooting needs.
This system comes with the P110 Column, DL-10 Dolly, and wheelguards.
Key Features
- Great Mobility in the Studio
This system is packaged with the DL-10 Dolloy that uses 4.9" casters with large-sized double-wheels - Add or remove air presure as needed
You don't have to worry about breaking down this pedestal to adjust the pressure - you can keep you camera on it while safely adjusting. - Pneumatic Saftey Valve
You don't have to worry about over cranking the air pressure on the column
| Payload Range | 66 lbs |
|---|---|
| Maximum Height | 62" |
| Minimum Height | 32" |
| Folded Length | na |
| Tripod System Weight | 40.6 Lbs |
| Leveling Bubble/Illuminated | No/No |
| Counterbalance | na |
| Drag Mode | na |
| Tilt Angle | na |
| Camera Plate/Range | na |
| Tripod Material/Section | Alluminum / 2 Stage Pneumatic / 2 Column |
| Ball Diameter | 100mm |
