The TWQ is a four position simultaneous charger designed to quickly, safely, and reliably charge Anton/Bauer Logic Series Batteries. Delivering all of the capabilities and efficiency of the field proven InterActive system, the TWQ is the perfect charger for the professional who needs to cycle batteries throughout the shooting day.
Anton/Bauer's InterActive Chargers are designed to charge all Anton/Bauer battery chemistries using an Adaptive Charging Architecture (“ACA”), which couples efficient charge control circuitry with a detailed communication protocol. The ACA allows Anton/Bauer chargers and batteries to communicate with one another, thus ensuring that the proper charge routine and termination algorithm (TCO, -ΔV, temperature compensated VCO, DT/dt, CCO, FUL, or I-min) are selected for a particular battery, which in turn ensures safe battery charging, maximum battery performance, superior reliability, and legendary cycle life. Other battery/charger systems employ less sophisticated charge routines that apply a “fast” charge to a battery followed immediately by a “float” charge. It may appear that such a charge routine safely and effectively charges many popular battery cell chemistries, however, such charge routines subject the battery to excessive wear and tear. Excess heat generated during the “fast” charge can lead to accelerated cell imbalance, and, when followed by a float charge, can further lead to battery cell anode/cathode material degradation. Over time, not only will cell performance and cycle life be reduced, but also safety. Voltage instabilities that develop as a result of excessive charge wear and tear can potentially lead to thermal runaway conditions that may lead to catastrophic battery failure while charging the battery.
Anton/Bauer's ACA applies a three stage charge routine:
• Charges the battery in a timely fashion without subjecting it to undue wear and tear
• Any excess heat generated during the primary charge is compensated for by the
secondary charge
• Battery Cell imbalance is slowed or negated
• Battery Cell anode/cathode material degradation is mitigated
By using Anton/Bauer's ACA, overall battery safety and exceptional performance is assured.
Field Upgradable Firmware - All Anton/Bauer InterActive Chargers are designed with field upgradable firmware, facilitating seamless upgrades and future compatibility with any new battery and/or cell chemistry, so a Quad 2702 charger purchased in 1996 is compatible with a DIONIC HCX battery designed in 2010.
All Anton/Bauer Chargers meet US, Canadian, European (CE) and FCC Part 15 Regulatory Requirements
Anton Bauer Provides a MAXX III (3 Years) Warranty!
Anton/Bauer's InterActive Chargers are designed to charge all Anton/Bauer battery chemistries using an Adaptive Charging Architecture (“ACA”), which couples efficient charge control circuitry with a detailed communication protocol. The ACA allows Anton/Bauer chargers and batteries to communicate with one another, thus ensuring that the proper charge routine and termination algorithm (TCO, -ΔV, temperature compensated VCO, DT/dt, CCO, FUL, or I-min) are selected for a particular battery, which in turn ensures safe battery charging, maximum battery performance, superior reliability, and legendary cycle life. Other battery/charger systems employ less sophisticated charge routines that apply a “fast” charge to a battery followed immediately by a “float” charge. It may appear that such a charge routine safely and effectively charges many popular battery cell chemistries, however, such charge routines subject the battery to excessive wear and tear. Excess heat generated during the “fast” charge can lead to accelerated cell imbalance, and, when followed by a float charge, can further lead to battery cell anode/cathode material degradation. Over time, not only will cell performance and cycle life be reduced, but also safety. Voltage instabilities that develop as a result of excessive charge wear and tear can potentially lead to thermal runaway conditions that may lead to catastrophic battery failure while charging the battery.
Anton/Bauer's ACA applies a three stage charge routine:
• Charges the battery in a timely fashion without subjecting it to undue wear and tear
• Any excess heat generated during the primary charge is compensated for by the
secondary charge
• Battery Cell imbalance is slowed or negated
• Battery Cell anode/cathode material degradation is mitigated
By using Anton/Bauer's ACA, overall battery safety and exceptional performance is assured.
Field Upgradable Firmware - All Anton/Bauer InterActive Chargers are designed with field upgradable firmware, facilitating seamless upgrades and future compatibility with any new battery and/or cell chemistry, so a Quad 2702 charger purchased in 1996 is compatible with a DIONIC HCX battery designed in 2010.
All Anton/Bauer Chargers meet US, Canadian, European (CE) and FCC Part 15 Regulatory Requirements
Anton Bauer Provides a MAXX III (3 Years) Warranty!
| Connectivity | Anton Bauer Mount |
|---|---|
| Charging Positions | 4-Position |
| Charger Type | Simultaneous |
| Power Supply | N/A |
| Diagnostics | Automatic Charge Termination / Interactive Charge Program |
| Power Requirements | 100-240 VAC, 50/60 Hz. Wide Range Input |
| Dimensions | 3.00 x 11.50 x 8.25 in |
| Weight | 3.5 lbs |
